What To Expect From the Professional Mold Elimination Process
8/21/2020 (Permalink)
Five Steps To Make Sure Mold Is Completely Removed
Have you discovered black mold in your Chalfont, PA, commercial building? It could be just the tip of the iceberg. A small mold problem can get out of hand fast, so it’s best to hire professional help when it comes to mold remediation. Experts take the following five steps to make sure the mold is completely removed and stays away for good.
1. Locate
First, the source of the moisture must be discovered. If the moisture is limited to a certain area (e.g., under a sink), that’s probably the extent of the growth. Faucets, fixtures and exposed plumbing are checked for leaks and/or water damage.
2. Protect
Personal protective equipment is important for personal safety and to keep cross-contamination at bay. A respirator made specifically for mold remediation is crucial. Also, ventless safety goggles and disposable gloves and shoe covers will be worn. Clothing should completely cover the skin.
3. Contain
Next, the area needs to be contained to prevent cross-contamination. Anything that moves the air (e.g, air conditioning and fans) has to be turned off and windows and doors closed. The smallest draft can send black mold spores flying through the air. Doorways often are sealed with plastic sheeting and painter’s tape. All vents should be sealed in the same fashion so that mold spores can’t make their way into the ductwork.
4. Eliminate
The professionals will then begin the mold elimination process. Industrial-grade equipment and cleaners are used to remove the infestation; different techniques are employed to clean different areas and surfaces.
5. Clean
Mold-infested materials must be carefully removed from the affected area to avoid cross-contamination. Finally, the whole area is thoroughly cleaned before opening doorways and unsealing vents or running fans.
You can feel confident that all of the black mold is eliminated from your building when you hire mold cleanup experts. They can return your property to its pre-mold condition as quickly as possible.